Marine Grade Nuts And Bolts

Commonly referred to as a setscrew or simply as a bolt. The fully threaded DIN 933 or ISO 4017 should not be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. As with the DIN 931 hex bolt, the hex drive allows a higher torque to be applied. All parts are to DIN 933 except where shown otherwise. The alternative standard ISO 4017 specifies differences in head dimensions for M10, M12 and M14 thread diameters from DIN 933. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

Commonly referred to as a setscrew and longer versions are referred to in the United States as a tap bolt. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. The hex drive allows a higher torque to be applied. Produced to ASME B18.2.1.

Commonly referred to as a setscrew and longer versions are referred to in the United States as a tap bolt. A standard spanner or ratchet is typically used to fit this product. Used for decades on all types of assembly throughout the world. The hex drive allows a higher torque to be applied. Produced to ASME B18.2.1.

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ASME B18.2.1, and includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types.

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ASME B18. 2.1, and includes an unthreaded 'shoulder' or portion of the shank. A hex drive permits a greater torque load to be applied to the joint over most other drive types.

Prevailing torque type nut manufactured to DIN 985. Popularly employed Hexagon nut incorporating a nylon insert to help prevent loosening when fitted. This is the standard profile variant (Type T), a higher profile option is available under DIN 982 (Type P). Typically fitted with a spanner or ratchet with socket.

Prevailing torque type nut manufactured to IFI-100/107. Popularly employed Hexagon nut incorporating a nylon insert to help prevent loosening when fitted. Typically fitted with a spanner or ratchet with socket.

Prevailing torque type nut manufactured to IFI-100/107. Popularly employed Hexagon nut incorporating a nylon insert to help prevent loosening when fitted. Typically fitted with a spanner or ratchet with socket.

Also known as an Allen screw or Allen bolt, or simply a cap screw. Socket Head Cap screws are a more modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found on much modern machinery. A hex key (otherwise known as an Allen key) is required to fit these fasteners. Conforming to DIN 912 or ISO 4762. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

Also known as an Allen screw or Allen bolt, or simply a cap screw, socket head cap screws are a more modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found on much modern machinery. A hex key (otherwise known as an Allen key) is required to fit these fasteners. Conforming to ASME/ANSI B18.3, the contact surfaces of this screw or bolt are protected from external damage. Generally manufactured with a partial thread beyond a certain length and nominal diameter combination, but occasionally some stock may include a fully threaded shank at the same combination.

Also known as an Allen screw or Allen bolt, or simply a cap screw, socket head cap screws are a more modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found on much modern machinery. A hex key (otherwise known as an Allen key) is required to fit these fasteners. Conforming to ASME/ANSI B18.3, the contact surfaces of this screw or bolt are protected from external damage. Generally manufactured with a partial thread beyond a certain length and nominal diameter combination, but occasionally some stock may include a fully threaded shank at the same combination.

Fine pitch screws are used in conjunction with a fine pitch threaded hole, or with fine pitch nuts which are also available on this website. The extra thread engagement gained from the finer pitch gives a more secure and stronger fitment. Used where high levels of strength are required - a fine pitch bolt has a larger stress area creating better tension than its coarse pitch counterpart, also they are less inclined to loosening through vibration due to the thread incline being smaller.

Similar to the DIN 912 socket cap screw but with a lower head height and smaller hex drive, the DIN 7984 is used where space is limited. This range is generally manufactured with a partial thread beyond a certain length and nominal diameter combination, but occasionally some stock may include a fully threaded shank at the same combination.

A popular and attractive socket head screw, typically used where aesthetics are important, or where a lower profile domed finish is required. The hex drive is generally smaller than other hex driven ranges and thus the ultimate tightening torque is reduced. Manufactured to ISO 7380, and almost always fully threaded.

A popular and attractive socket head screw, typically used where aesthetics are important, or where a lower profile domed finish is required. The hex drive is generally smaller than other hex driven ranges and thus the ultimate tightening torque is reduced. Manufactured to ASME/ANSI B18.3, and always fully threaded.

A countersunk headed screw conforming with ISO 10642 or DIN 7991, requiring a hex key (otherwise known as an Allen key) to fit. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Generally manufactured with a full thread, though occasionally some stock may include a partially threaded shank. The head diameter is slightly larger than that of the equivalent DIN 965 Phillips or Pozi driven screw.

A countersunk headed screw conforming with ASME/ANSI B18.3, requiring a hex key (otherwise known as an Allen key) to fit. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Generally manufactured with a full thread, though occasionally some stock may include a partially threaded shank.

A countersunk headed screw conforming with ASME/ANSI B18.3, requiring a hex key (otherwise known as an Allen key) to fit. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. Generally manufactured with a full thread, though occasionally some stock may include a partially threaded shank.

Hexagon full nut to DIN standard 934 with standard metric coarse pitch. Typically fitted with a spanner or ratchet with socket. The most popular nut type, and used for decades on all types of assemblies throughout the world. Can be used in conjunction with Hexagon Thin nuts in a "locking" formation for a more secure fitment. Fine pitch and left hand thread variants are also available immediately below this item. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

Hexagon full nut to ASME B18.6.3. Typically fitted with a spanner or ratchet with socket. The most popular nut type, and used for decades on all types of assembly throughout the world.

Hexagon full nut to ASME B18.6.3. Typically fitted with a spanner or ratchet with socket. The most popular nut type, and used for decades on all types of assembly throughout the world.

Fine Pitch Threaded hexagon full nut to DIN standard 934. Typically fitted with a spanner or ratchet with socket. The significantly more unusual Fine Pitch variant of the standard Coarse Pitch hex nut for use where more thread engagement is desired. Only for use in conjunction with a matching Fine Thread Pitch bolts or screws.

Hexagon full nut with standard metric coarse pitch, but with a Left Handed Thread. To DIN 934. Can only be used in conjunction with Left Hand Thread screws and bolts.

Nut conforming to DIN 439. Also known as a half nut, thin nut, or jam/lock nut. Typically fitted with a spanner or ratchet with socket, often used in pairs or in conjunction with a hexagon full nut in a locking arrangement. A popular nut type, and used for decades on all types of assembly throughout the world. Fine Pitch and Left Hand Thread variants are also available immediately below this item.

Nut conforming to DIN 439 but with Fine Thread Pitch. Also known as a half nut, thin nut, or jam/lock nut. Typically fitted with a spanner or ratchet with socket, often used in pairs in a nut locking arrangement. A popular nut type, with a more unusual Fine Thread Pitch for when more thread engagement is required. Must be used in conjunction with the appropriate Fine Thread Pitch bolts or screws.

Hexagon thin, jam, locking or half nut with standard metric coarse pitch, but with a Left Handed Thread. To DIN 439. Only for use in conjunction with Left Handed Thread bolts or screws.

Prevailing torque type nut manufactured to DIN 982. Hexagon nut incorporating a nylon insert to help prevent loosening when fitted. This is the higher profile (Type P) variant with more available thread engagement and is typically fitted with a spanner or ratchet with socket. A lower profile, where perhaps space is at a premium is also available under DIN 985 (Type T).

Prevailing torque nut, thin type. Popularly employed Hexagon nut incorporating a nylon insert to help prevent loosening when fitted. Typically fitted with a spanner or ratchet with socket.

Prevailing torque nut, thin type. Popularly employed Hexagon nut incorporating a nylon insert to help prevent loosening when fitted. Typically fitted with a spanner or ratchet with socket.

A popular nut used in applications where aesthetics are important, giving an attractive look. Domed end also ensures a smooth snag-free finish protecting both the fixing and any foreign body that may come into contact . Also known as an Acorn Nut, these nuts are manufactured to DIN 1587. Also available with a Nyloc insert to DIN 986. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

An hexagon nut with incorporated flange, to DIN 6923. The flange offers protection for the bolted component where the driving tool may otherwise scratch it's surface. The flange also lessens the need to use a washer. This particular version has serrations on the base. A non-serrated variant is also available.

An hexagon nut with incorporated flange. The flange offers protection for the bolted component where the driving tool may otherwise scratch it's surface. The flange also lessens the need to use a washer. This particular version has serrations on the base.

Compared to standard hex nuts, square nuts have a greater surface contact with the part being fastened, and therefore provide greater resistance to loosening. They are also much less likely to become rounded-off after repeated loosening/tightening cycles. Manufactured to DIN 557.

Popularly employed where frequent hand tightening and untightening of joints is required. To the German Form with slightly larger, rounded wings. To DIN 315. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

Hexagon Machine Screw Nuts (UNC - Unified Coarse Pitch) imported from the USA. These nuts generally have smaller internal diameters than the range available in standard hexagon nuts, so fit the smaller gauge sizes for Imperial screws. They also tend to be thinner or lower in height but have a larger outer diameter. These are specifically designed to be used in conjunction with other UNC screws or bolts. Often used in small electrical goods manufacturing, such as computers and hifi systems.

Hexagon Coupling Nuts also known as a long nut, these DIN 6334 connector nuts are typically employed in joining sections of threaded bar/studding together where required.

Also known as a long nut, these coupling or connector nuts are typically employed in joining sections of threaded bar/studding together where required.

Prevailing Torque Nuts are a type of all metal locking nut. Designed to lock and resist vibration or shock. Part of the top threads on the nut deform to create a locking action by increased friction, meaning they will not spin freely and torque via a spanner would be needed to fit and remove - hence the name Prevailing Torque. Ideal for applications that require protection against vibratory and other equally dynamic forces. Being All Metal, they do not suffer adversely from high temperatures or chemical contact like other materials such as plastic (used in Nyloc Nuts). Used frequently in Farming Machinery, Automotive and Production Processes.

Slotted or split beam type hexagon all metal locking nut . Manufactured in the UK with the Aerotight trademark. Undersize threaded sections on top portion of nut mean that when tightened into position the undersize section is forced outward creating high friction and a more secure 'locked' fitment. A locking nut for use in higher temperatures where a locking nylon ring nut would be unsuitable.

Counter Nut also known as a Pal Nut, are a stamped nuts made from sheet metal. They are designed to fit over a normal nut and lock it into place by using a series of protruding flanges that grip the host nut securely. Mainly used in conjunction with a standard hexagon nut. Manufactured to DIN 7967.

These attractive 5-Lobe Pin security machine screws offer an improved tamper resistance compared to the more commonly available 6-Lobe Pin drive. The tooling is therefore more specialised and harder for members of the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a button head. Torx and other lobed drive designs allows for a higher torque to be exerted than a similarly sized conventional hex socket head.

These attractive 5-Lobe Pin security machine screws offer an improved tamper resistance compared to the more commonly available 6-Lobe Pin drive. The tooling is therefore more specialised and harder for members of the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a countersunk head. Torx and other lobed designs allows for a higher torque to be exerted than a similarly sized conventional hex socket head.

A Machine screw with a phillips drive, designed to be tightened with a screwdriver. Typically found on consumer electronics and other small machinery where high torque fasteners are not necessary. Conforms with DIN 7985. Sometimes considered more attractive than a pozidriv equivalent.

A Machine screw with a pozi drive, designed to be tightened with a screwdriver. Typically found on consumer electronics and other small machinery where high torque fasteners are not necessary. Conforms with DIN 7985.

A popular machine screw with a pozi drive. The countersunk head is typically used in conjunction with a countersunk hole providing a flush, snag free fit. These items are always fully threaded. Conforms to DIN 965. Typically found on consumer electronics and other small machinery where high torque fasteners are not necessary.

Similar to DIN 84, but with a larger head diameter and a slightly different head profile. Manufactured to ISO 1580 or DIN 85. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

A slot drive, countersunk headed screw, typically used in conjunction with a countersunk hole which provides a flush, snag free fit.

A machine screw with a traditional slot drive and a flat topped near cylindrical shaped head. Manufactured to ISO 1207 or DIN 84. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

Also known as star, 6 lobe, and hexalobular internal. Torx screws are commonly found on cars, motorcycles, bicycle brake systems, hard disk drives, computer systems and consumer electronics and are becoming increasingly popular. Once, they were typically used in applications requiring tamper resistance; as drivers became more common, specific tamper-resistant variants were developed. The Torx design allows for a higher torque to be exerted than a similarly sized conventional hex socket head. Conforms with DIN 7985.

Also known as star, 6 lobe, and hexalobular internal. Torx screws are commonly found on cars, motorcycles, bicycle brake systems, hard disk drives, computer systems and consumer electronics and are becoming increasingly popular. Once, they were typically used in applications requiring tamper resistance; as drivers became more common, specific tamper-resistant variants were developed. The Torx design allows for a higher torque to be exerted than a similarly sized conventional hex socket head.

Generally used in timber to timber and timber to metal construction, these bolts incorporate a square neck to grip the hole in the timber when fitting, and therefore negates the need for any drive recess to be included on top of the head. Supplied to DIN 603. Manufactured with a fully threaded shank. Nuts are supplied seperately, unlike the mild steel versions available elsewhere on the site.

Generally used in timber to timber and timber to metal construction, these bolts incorporate a square neck to grip the hole in the timber when fitting, and therefore negates the need for any drive recess to be included on top of the head. Supplied to DIN 603. Manufactured with a partially threaded shank. Nuts are supplied seperately, unlike the mild steel versions available elsewhere on the site.

Also known as a set screw, these headless types of screws have many uses. This particular type has a hex socket drive, and a depression called a 'cup' on the opposite end, as to ISO 4029 or DIN 916.

Also known as a set screw, these headless types of screws have many uses. This particular type has a hex socket drive, and a flat on the opposite end, as to ISO 4026 or DIN 913.

Also known as a set screw, these headless types of screws have many uses. This particular type has a hex socket drive, and a cone point on the opposite end, as to ISO 4027 or DIN 914.

Also known as a set screw, these headless types of screws have many uses. This particular type has a hex socket drive, and a square profiled end called a dog point on the opposite end, as to ISO 4028 or DIN 915.

DIN 444 eye bolts / swing bolts in A4 stainless steel, with threaded shaft. Ideal for anchoring hooks, attaching rope wire and cables to solid surfaces, such as wood, metal, concrete, etc. The A4 stainless steel, grade 316-NM give it corrosion resistance and durability, making it perfect for marine, food, medical and pharmaceutical industrial enviroments.

A popular and attractive socket head screw with an integrated flange offering a wider head for bolting softer materials. Typically used where aesthetics are important, or where a lower profile domed finish is required. The hex drive is generally smaller than other hex driven ranges and thus the ultimate tightening torque is reduced. Manufactured to ISO 7380, the same standard as the non flanged variant, and always fully threaded.

Hex nuts manufactured to DIN 936 are a low type hex nut. Their height is between a full nut (DIN 934) and a thin/half nut (DIN 439). They can also be known as thin nuts or jam nuts and are often used in conjunction with other nuts as a lock nut. The slim flat profile of these hex nuts makes them useful where space is limited or where there is only a few threads of a bolt to engage with.

The main function of slotted round nuts is to hold parts that do not require any specific preload force. Designed to be tightened with a flat head screwdriver and used in low stress situations. The round shape is aesthetically pleasing, but they can also be easily recessed into a surface to give a clean, flush finish. Slotted Round Nuts are used in a wide range of applications for electrical engineering and machine construction. DIN 546 applies to slotted round nuts, with sizes from M1 to M20.

Larger and thicker variant of a standard hexagon full nut. Generally used with large diameter and high strength bolts, and manufactured to ASME B18.2.2. These nuts are manufacured with a double chamfer (chamfered both sides), but sizes larger than 7/16 will likely include a flat or washer face on one side. Please bear this in mind when ordering.